Single row tapered roller bearings
Single row tapered roller bearings SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation.Our single row tapered roller bearings are designed and manufactured to handle both axial and radial loads. The standard Cage for American Tapered Roller Bearings is a “pin-type” design that has proven to be very successful in applications that experience very high loads and high speeds. No suffix is used on our bearing number for this cage, while other types of cages have their own suffix code when used.
Taper roller bearings consist of an inner ring (cone), an outer ring (cup), a cage and rollers which are profiled to distribute the load evenly. They have high radial and axial (thrust) load capacities at low to intermediate speeds. Taper roller bearings are available in single-row, two-row and four-row designs.
- NTN 4T-399AS Single row tapered roller bearings
- 1300 rpm
- 99000 lb
- NTN 4T-399A Single row tapered roller bearings
- 013992032133
- 4-1/2 in
- 66,675 mm x 112,712 mm x 30,048 mm NTN 4T-3984/3925 Single row tapered roller bearings
- Deep Groove Ball Bea
- Bottom Mount
- 66,675 mm x 112,712 mm x 30,048 mm NTN 4T-3984/3920 Single row tapered roller bearings
- 35
- Grease for eatables
- NTN 4T-3984 Single row tapered roller bearings
- Insert Bearing Unit
- Bearing Steel
- 66,675 mm x 112,712 mm x 30,048 mm NTN 4T-3994/3920 Single row tapered roller bearings
- Bearings with Housin
- Flange Type
- NTN 4T-3994 Single row tapered roller bearings
- 1045 Carbon Steel
- Bearings with Housin