Single row tapered roller bearings
Single row tapered roller bearings SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation.Our single row tapered roller bearings are designed and manufactured to handle both axial and radial loads. The standard Cage for American Tapered Roller Bearings is a “pin-type” design that has proven to be very successful in applications that experience very high loads and high speeds. No suffix is used on our bearing number for this cage, while other types of cages have their own suffix code when used.
Taper roller bearings consist of an inner ring (cone), an outer ring (cup), a cage and rollers which are profiled to distribute the load evenly. They have high radial and axial (thrust) load capacities at low to intermediate speeds. Taper roller bearings are available in single-row, two-row and four-row designs.
- 46,038 mm x 90,119 mm x 21,692 mm NTN 4T-359S/352 Single row tapered roller bearings
- 0.5 in
- Kevlar Packing Seal
- NTN 4T-359S Single row tapered roller bearings
- Tapered hole adapter
- Triple seals
- NTN 4T-359A Single row tapered roller bearings
- SCC210
- 27.5 mm
- NTN 4T-358X Single row tapered roller bearings
- Punching
- Flat
- NTN 4T-3586 Single row tapered roller bearings
- 2.3124 in
- 0.117
- NTN 4T-3585 Single row tapered roller bearings
- 875 mm
- 50 mm
- NTN 4T-3580 Single row tapered roller bearings
- No
- Pillow Type