Single row tapered roller bearings
Single row tapered roller bearings SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation.Our single row tapered roller bearings are designed and manufactured to handle both axial and radial loads. The standard Cage for American Tapered Roller Bearings is a “pin-type” design that has proven to be very successful in applications that experience very high loads and high speeds. No suffix is used on our bearing number for this cage, while other types of cages have their own suffix code when used.
Taper roller bearings consist of an inner ring (cone), an outer ring (cup), a cage and rollers which are profiled to distribute the load evenly. They have high radial and axial (thrust) load capacities at low to intermediate speeds. Taper roller bearings are available in single-row, two-row and four-row designs.
- 38,1 mm x 85,725 mm x 30,162 mm NTN 4T-3875/3820 Single row tapered roller bearings
- Deep Groove Ball Bea
- Compact Type
- NTN 4T-3872 Single row tapered roller bearings
- Bearings with Housin
- Compact Type
- NTN 4T-387 Single row tapered roller bearings
- 38.1 mm
- 18 mm
- 57,15 mm x 98,425 mm x 21,946 mm NTN 4T-387/382 Single row tapered roller bearings
- 2450
- 440C Stainless Steel
- NTN 4T-386A Single row tapered roller bearings
- 40 mm
- 165 mm
- NTN 4T-385A Single row tapered roller bearings
- 4.76 mm
- 2 mm